1500 Accessory Boards

A wide range of interface boards and accessories are available to support customer 1500 system evaluation and integration steps. Accessories are available in kit form with interface harnesses, power supplies, etc. (ideal for initial test and evaluation) or as board-only options (ideal to use as part of customer integrations).

SightLine welcomes the opportunity to assist with integration efforts by can providing custom accessory design support and discussing new interface board needs. Please contact SightLine to discuss new integration opportunities.

Dimensioned drawings, 3D models, and ICD pin-outs for all of these accessories are available on our Support – Documentation page.

Bench / System Interface Boards

SLA-1500-AB

Provides a laboratory bench / development interface with standard connectors. All OEM signals are broken out to maximize test access. Available in kit form seperate from the OEM or as an EVAL kit with a full featured OEM included.

SLA-1500-mAB

A small interface board which is part of the 1500-ENC assembly but is also available as a board only option. It provides standard connectors for analog Video In and Out, ethernet, power and RS232 serial. An FFC interface allows digital interface connections to Tau/Quark/Tamarisk LWIR cameras.

SLA-1500-nAB

The smallest 1500 analog video interface, it provides OEM J3 signal breakout, providing standard connectors for analog Video In and Out, ethernet, power and RS232 serial.

Camera Interface Boards

SLA-1500-SONY / TAMRON

Interface to Sony and Tamron HD EO block cameras. KEL microcoax interface to Sony FCB-EH6xxx, EV7xxx, and EH31xx cameras as well as the Tamron MP1010M-VC. Board matches mounting holes on Sony FCB-EH6300.

SLA-1500-HIT

Interface to Hitachi DI-SC120R 720p global shutter block camera. The adapter board interfaces to the cameras via a standard flat HC36 cable. Board matches mounting holes on the Hitachi camera.

SLA-1500-CL

Interface to Base configuration Camera Link cameras. SDR connector.

SLA-1500-HDMI

Interface to HDMI cameras. Provides TYPE A standard (female) HDMI receptacle.

SLA-1500-FFC

Provides FFC ribbon connection to 1500-OEM. Pairs with Tau, Quark and Tamarisk FFC boards (camera side) to provide a digital video connection between these IR cmaeras and the OEM.

SLA-FFC-DRS

Connects directly to the DRS® Tamarisk family of 17 µm uncooled thermal imaging camera modules. Allows FFC ribbon connection to the 1500-OEM via the 1500-FFC board.

SLA-FFC-QRK

Connects directly to the FLIR QUARK LWIR uncooled thermal imaging camera. Allows FFC ribbon connection to the 1500-OEM via the 1500-FFC board.

SLA-FFC-TAU

Connects to FLIR TAU 2 LWIR thermal imaging camera. Allows FFC ribbon connection to the 1500-OEM via the 1500-FFC board.

SLA-1500-FPC

Provides FPC ribbon connection to 1500-OEM. Ribbon cable connects to the Airborne Innovations AGS720 global shutter micro-camera.

Speciality Boards

SLA-1550-EAB

This networking-focused board has an integrated 1500-SOM for video processing, along with a 5 port 10/100 Base-T network switch, serial ports breakout, dual analog inputs and FFC interfacd for connection to Tau, Quark and Tamarisk connections.

SLA-1500-RAB

This board provides tight integration with the powerful and small Microhard IPnDDL and pDDL bridge radios.

SLA-1500-RABn

Connects to 1500-RAB board to provide standard connector interfaces for analog video in, microhard and sighline serial ports, and power. The SLA-KIT-1500-RAB kit includes this RABn interface board and the cables, to faciltate a complete setup less the OEM.

Enclosure Options

SLA-1500-ENC

The 1500 enclosure option provides a simple solution where an enclosure is best for system integration. It provides standard connectors for analog Video In and Out, ethernet, power and RS232 serial. An FFC interface allows digital interface connections to Tau/Quark/Tamarisk LWIR cameras. It is available as an enclosure add on to 1500-OEM, in kit form, or as an EVAL kit with a full featured OEM included.

SLA-1500-PENC

Ruggedized 1500 enclosure option provides a more robust, mil-style connectorized option for the 1500. Mil-std-810 tested. Longer lead times and minimum purchase quantity required.