3000 Accessory Boards

A wide range of interface boards and accessories are available to support customer 3000-OEM evaluation and system integration steps. Accessories are available in kit form with interface harnesses, power supplies, etc. (ideal for initial test and evaluation) or as board-only options (ideal to use as part of customer integrations).

SightLine welcomes the opportunity to assist with integration efforts by providing custom accessory design support and discussing new interface board needs. Please contact SightLine to discuss new integration opportunities.

Dimensioned drawings, 3D models, and ICD pin-outs for all of these accessories are available on our Support – Documentation page.

Bench / System Interface Board

SLA-3000-IO

This board connects to the 3000-OEM board and provides standard connections for power, network, serial, SD card, video analog out, HDMI video out, 2 x digital video input channels, and one digital output channel. It is key to the bench test environment and is suitable for system integration.

SLA-KIT-3000-IO

Provides a complete laboratory bench / development interface with standard connectors. Available in kit form seperate from the OEM (with and without heatsink) or as an EVAL kit with a full featured OEM, HDSDI input and test camera included.

Camera Interface Boards

SLA-3000-AB

This board provides an interface for up to two analog (NTSC or PAL) inputs.

SLA-3000-SONY / TAMRON

Interface to Sony and Tamron HD EO block cameras. KEL microcoax interface to Sony FCB-EH6xxx, EV7xxx, and EH31xx cameras as well as the Tamron MP1010M-VC.

SLA-3000-HIT

Interface to Hitachi DI-SC120R 720p global shutter block camera. The adapter board interfaces to the cameras via a standard flat HC36 cable.

SLA-3000-CL

Interface to Base configuration Camera Link cameras. SDR connector.

SLA-3000-HDMI

Interface to HDMI cameras. Provides TYPE A standard (female) HDMI receptacle.

SLA-3000-HDSDI-IN

Interface to HDSDI cameras. MCX connector, SMPTE 292M and SMPTE 259M-C. 1080p/60.

SLA-3000-FFC

Provides FFC ribbon connection to 3000-OEM. Pairs with Tau, Quark and Tamarisk FFC boards (camera side) to provide a digital video connection between these IR cmaeras and the OEM.

SLA-FFC-DRS

Connects directly to the DRS Tamarisk┬« family of 17 ┬Ám uncooled thermal imaging camera modules. Allows FFC ribbon connection to the 3000-OEM via the 3000-FFC board. This camera-side board is identical to that used with the SLA-1500-FFC.

SLA-FFC-QRK

Connects directly to the FLIR QUARK LWIR uncooled thermal imaging camera. Allows FFC ribbon connection to the 3000-OEM via the 3000-FFC board. This camera-side board is identical to that used with the SLA-1500-FFC.

SLA-FFC-TAU

Connects to FLIR TAU 2 LWIR thermal imaging camera. Allows FFC ribbon connection to the 3000-OEM via the 3000-FFC board. This camera-side board is identical to that used with the SLA-1500-FFC.

SLA-3000-FPC

Provides FPC ribbon connection to 3000-OEM. Ribbon cable connects to the Airborne Innovations AGS720 global shutter micro-camera.

Digital Output Connector Boards

SLA-3000-HDSDI-OUT

Provides a HD-SDI output video signal. MCX connector, SMPTE 292M and SMPTE 259M-C. 1080p/60.

SLA-3000-USB

Provides access to serial ports and GPIO lines that may be useful for system integrators. Includes USB connector for future sofware functionality (USB NOT implemented at this time).