Description
It includes two video channels providing a full suite of processing functions. The 3000-OEM can provide full frame rate HD IP streaming with KLV data, stabilzation, and object tracking at 1080p/30. Configuration options and a wide range of accessory boards provide important integration flexibility.
- Full set of video processing functions. Visit our Software Functions page
- Multiple video inputs, true multi-channel processing
- Two full width video inputs to 1080p/60
- Video Outputs: IP streamed encoded (multiple streams), HDMI, HDSDI, and Analog
- Video output presentation options: switched, side by side, PiP, blending
- Tracker Telemetry Output to Gimbal System Controller
- Onboard Video and Snapshot Recording to MicroSD (card on IO board)
- RS-232 and Ethernet for Command and Control and telemetry
- OEM is just 1.97 x 3.47 inches, 39 grams
Two full-width parallel digital video input with adaptors supporting:
- Sony FCB-EH6xxx, FCB-EH31xx and FCB-EV7xxxx
- Tamron MP1010M-VC 10x block
- Hitachi DI-SC120R
- Camera Link
- HDMI
- FLIR Tau, Quark, and Boson IR via ribbon cable
- DRS Tamarisk IR via ribbon cable
- Airborne Innovations 720p GS via ribbon cable
- Analog (NTSC or PAL). Two analog inputs on adaptor board using one digital video input slot.
- Physical Specifications:
- Size: 3.47 x 1.97 x 0.2 inches (88 x 50 x 6.25 mm)
- Weight: 1.4 ounces (39 grams)
- Power Consumption:
- Input: 8-15V DC
- 10W maximum (anticipated)
- Analog Inputs (NTSC/PAL):
- up to 3 (When using Analog to Digital Input Adaptor Boards)
- Frame size and video rate out:
- 1080p @30 fps + SD @ 30 fps
- 2 x 720p @ 30 fps
- Encoded Video Out:
- MPEG2 TS (H.264 with KLV metadata)
- MPEG4
- RTP M-JPEG
- IP Networking:
- UDP, TCP, FTP, SSH, RTP, and RTSP connectivity
- unicast, multicast, broadcast, DHCP, LinkLocal, Static IP, and VLAN address
- Other Video Output(s):
- Analog
- HDSDI
- HDMI
- Multi-Camera Processing:
- Can process both, stream both, Picture in Picture, switching
- KLV Metadata on encoded Video:
MISB Starndards- 0102.10
- 0601.7
- 0603.2
- 0604.3
- 0903.3
- Interfaces:
- 10/100 Base T Ethernet
- Serial ports (TTL): 5
- GPIO
- I2C
- Configuration:
- Software configuration determined by customer. See Software Functions page for more information.
3000-OEM Introduction / Handout Sheet
3000-OEM Rev B Dimensional Drawing
3000-OEM Rev C Dimensional Drawing
3000-OEM Exploded view drawing
EAN-Startup Guide Initial configuration and test procedure
EAN-Camera Compatibility List of validated cameras and configuration settings
EAN-Network Configuration Connecting to IP networks
EAN-Encoding Options and settings for IP encoded video
EAN-Firmware Upgrade Utility Updating software
ICD-3000-OEM Interface control document
ICD-3000-Adapter Boards Interface control document for adapter boards
EAN-Managing the Parameter File Managing and saving the parameter file
